7A
SLEEP | SLEEP | TIMER FADER DISPLAY | |
|
|
| |
1 | 2 | 3 | |
4 | 5 | 6 | ≥ 10 |
7 | 8 | 9 | 0 |
SLEEP
Time setting
7B
| SLEEP | TIMER FADER DISPLAY | |
|
|
| TIMER FADER |
1 | 2 | 3 | |
4 | 5 | 6 | ≥ 10 |
7 | 8 | 9 | 0 |
TIMER FADER
AThe Sleep Timer
Remote control only
You can set the unit to turn off after certain time. (e.g. when you want to fall asleep while listening to music.)
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP 30 SLEEP 60 
SLEEP 90 
SLEEP 120
SLEEP OFF
To cancel
Press [SLEEP] to select “SLEEP OFF”.
To check the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to select the new time.
Note
You can use sleep timer in combination with play and record timer. Make sure the unit is off before the play/record timer’s start time.
BThe Timer Fader
Remote control only
Volume increases slowly to the set level when a timer turns the unit | Timer | |
| ||
on and decreases slowly when the sleep timer turns the unit off. |
| |
Press [TIMER FADER] to display “ | ”. |
|
| ||
(All timers will be affected.) Press again to cancel.
Note
This feature does not affect record timer’s recordings.
Maintenance
|
| Reference |
If the surfaces are dirty |
| |
|
| |
To clean this unit, wipe with a soft, dry cloth. |
| |
If the surfaces are extremely dirty, use a soft cloth dipped in a soap- |
| |
| ||
•Never use alcohol, paint thinner, or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads after every 10 hours of use to assure good quality playback and recording.
Use a cleaning tape (not included).
19
RQT5189