About the 2-ZONE function

Different pieces of music heard by plural listeners (2-ZONE function)

The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural lis- teners to enjoy separate music sources.

This unit can control its internal sources (radio, CD, MP3, etc.) to play back them, and further, can simultaneously play back sources from ex- ternal equipment connected via CeNET (for in- stance, CD changers etc.).

The sources of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone sys- tems (WH104/WH204).

Notes:

•Except AUX, the MAIN and SUB zones cannot si- multaneously use sources inside this unit.

Also, external equipment connected via CeNET cannot simultaneously be used.

•The TV mode while the 2-ZONE function is tuned on is forced to change to “VTR playback.”

•The ISR function cannot be operated when the 2- ZONE function is turned on.

•The Audio mode and ADF function cannot be set for the sources of the SUB zone.

•If any of following external equipment is con- nected, this function is disenabled.

•5.1 channel surround decoder (DVH920/ DVH940)

Setting the 2-ZONE function

The initial setting is “OFF”.

When you have set the 2-ZONE function to “ON” in the initial state, the MAIN zone services for sources inside this unit and the SUB zone, for AUX. Changing a source during later use causes the latest heard source to be invoked.

Press and hold the [ ] button for 1 second or longer to turn on or off. When the 2-ZONE func- tion is turned on, “2-ZONE ON” on the display lights.

2.Press the [FNC] button to select a source in the control zone.

Every time the button is pressed, the follow- ings appear in turn.

● For a source group included in this unit:

Radio ➜ CD/MP3 ➜ AUX ➜ Radio...

●For a source group in external equip- ment:

AUX ➜ CD changer ➜ DVD changer ➜ TV

➜AUX...

∗The name of equipment that is not connected to this unit is not displayed.

•To change a current musical performance etc., press the button that controls the selected source ([SCN] button, etc.).

●Example for source change

Oparation	MAIN zone	SUB zone

2-ZONE	Radio playback	Radio playback
turned off
turned off

2-ZONE	Radio playback	AUX
turned on
turned on

2-ZONE	Radio playback	Radio playback
turned off
turned off

Source	External	External
change	equipment (CD	equipment (CD
	changer)	changer)



2-ZONE	External	Radio playback
turned on	equipment (CD
	changer)

Adjusting the sound level for the MAIN zone

You can adjust the sound level only for the MAIN zone. To adjust the sound level for the SUB zone, adjust it in the headphone (WH104/WH204) side.

Turning the [ROTARY] knob to adjust the sound level for the MAIN zone.

English

Switching sources

1. Press the [ ] button to select the control zone (“MAIN” or “SUB”).

Every time the button is pressed, the “MAIN ZONE” changes to the “SUB ZONE” or vice versa.

“MAIN” or “SUB” on the display lights at that time, thereby indicating that the relevant zone becomes ready to operate.

Counterchanging the sources of the MAIN and SUB zones

You can supersede the music sources of the MAIN and SUB zones.

Press and hold the [ISR] button for 1 second or longer to counterchange the sources of the MAIN and SUB zones.

“REVERSE” is displayed for 2 seconds on the display.

DXZ745MP 21