5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
1.With the MOTORIZED FACE closed, turn off the power.
2.Press the [RELEASE] button deeply to open the DCP.
[RELEASE] button
3. Pull the DCP toward you and remove it.
DCP
CAUTION
•Always close the MOTORIZED FACE before removing the DCP.
•If you remove the DCP with the MOTOR- IZED FACE open, the MOTORIZED FACE closes immediately. Be careful not to get your fingers caught.
Attaching the DCP | English |
| |
1. Insert the DCP so that the A section on the |
|
right side of the DCP catches on the hook B |
|
on the unit. |
|
2.Press the left side C of the DCP carefully to fit it in place.
CAUTION
•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
•If the [RELEASE] button is pressed and the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either install it on the unit or put it in its DCP case.
•The connector connecting the unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
DXZ745MP 9