iHome iBT44 iB instruction manual Pairing with a Different Device, Playing Audio Via Bluetooth

Page 10

Using the iBT44

Pairing with a Different Device

When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 30 feet).

Playing Audio Via Bluetooth

1.Press the Power Button to turn on the unit in the last active mode. If needed, press the Button to enter Bluetooth mode. The blue light on the Bluetooth Button will flash and a tone will sound

as the unit searches for a previously paired device, and then turn solid blue once a previously paired device is detected.

2.Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. While audio is playing, press to pause play, and again to resume play.

3.Use the controls on your device to navigate tracks, etc.

4.Turn the Volume Knob to control the system volume. Adjust EQ settings as desired.

NOTE: The volume ranges from 0 - 40. While the dial can still be turned when these limits are reached, doing so has no effect.

5.When done listening, press the Power Button to turn the unit off. Remember to turn off your audio

device, too.

TIP: In Bluetooth mode, turn the Tuning Knob to adjust the brightness on the display. Note that the tuning knob can continue turning even when the brightest or dimmest (off) settings have been reached.

6

Image 10
Contents IBT44 Maintenance IntroductionIBT44 QDIDB019566Table of Contents Included Meet Your iBT44 FrontUsing the iBT44 Setting Up the UnitDisplay Using Bluetooth Pairing Your Device Pairing with a Different Device Playing Audio Via BluetoothPlaying Audio via Line-In FM RadioUsing FM Radio in Other Countries Charging Devices via USB PortRemote Control Battery compartment cover Important Safety Instructions Page Trouble pairing device/computer with iBT44 Unit doesn’t respond no powerCan’t see the display Limited 1 Year Warranty