|
| SPECIFICATIONS |
|
AMPLIFIER AND SPEAKER |
|
| |
Power | 130W RMS @ 4 Ω | ||
S/N Ratio | >115dB | ||
THD Power output, 20Hz to 20KHz | <0.1% | ||
Speaker | 8 Ω | ||
Tweeter type | Piezoelectric Horn | ||
Woofer | 12" | ||
FREQUENCY RESPONSE (Mic input to output) |
| ||
Line level o/p @ +4dBu into 600 Ω | 20Hz- 20KHz ±3dB | ||
Power amp o/p 1 watt into 8 Ω per side | 20Hz- 20KHz ±3dB | ||
SENSITIVITY @ LINE OUTPUT +4dBu with Master and Channels controls set to MID | |||
Mic/Line | |||
Tape in | |||
Max Input Level XLR | |||
Max Input Level 1/4" | +22dB | ||
CHANNEL EQUALIZATION |
|
| |
Low EQ | 100Hz ±15dB | ||
Hi EQ | 12KHz ±15dB | ||
MASTER EQUALIZATION |
|
| |
Low EQ | 100Hz ±15dB | ||
Mid EQ | 1.5KHz ±15dB | ||
Hi EQ | 10KHz ±15dB | ||
MICROPHONE PREAMP E.I.N. (150ohm Terminated, max. Gain) | |||
POWER REQUIREMENTS | |||
FUSING | 5x20mm glass type, 4A/250V for 115VAC, and 3A/250V for 230VAC operation, | ||
DIMENSIONS (H x W x D) | 22.8" x 19.5" x 16" (57.9 x 49.5 x 40.6cm) | ||
WEIGHT | 66lbs. (29.9 Kg) | ||
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
7