TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS/RANDOM
1 |
|
|
2 | 3 | 1 |
| 4 | |
|
|
2 |
1 |
2 |
3 |
1 |
2 |
To repeat a single track, press the P.MODE/MEM UP button 1 once;
“
” will blink in the display. Press the SKIP/TUNING n 2 or o 3 button to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( 
) button 4 to begin playback. The specific track you selected will be repeated continuously.
To repeat all of the tracks on a disc continuously, press the P.MODE/MEM UP button 1 twice; “ 
” will appear in the display. Press the PLAY/PAUSE ( 
) button 2 to begin playback.
To randomly play all of the tracks on a disc continuously, press the P.MODE/MEM UP button 1 three times; “RND” will appear in the display. Press the PLAY/PAUSE ( 
) button 2 to begin playback.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.
NOTE: You cannot program a disc while it is playing. If the disc is playing, press the STOP (X) button first and then follow the programming steps below.
To perform programmed playback, proceed as follows:
1
1 
2
3
2
Press the POWER button 1 to turn the unit on. Press the FUNCTION button 2 to select the CD mode.
Open the CD compartment lid by pressing the OPEN/CLOSE area and insert your disc in the CD player. Close the CD compart- ment door.
Press the PROG/MEMORY button; “P01” (program number) will briefly appear and then “00” (track number) and “MEM” will blink in the display.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
10