Preparation for USE, Unpacking and Setup

AC Plug

AC Outlet

PREPARATION FOR USE

Unpacking and Setup

•Carefully remove the unit from the display carton and remove all packing material from the unit itself.

•The detachable AC power cord is packed in the carton separately from the unit. Make sure that the AC power cord is not accidentally discarded with the carton or packing material.

•Press the OPEN/CLOSE area to open the CD compartment door. There is a white card in the CD compartment which is intended to prevent the CD pickup from moving during shipment of the product. Remove this card from the CD compartment before use.

Power Sources

This portable audio system is designed to operate on either 120V AC 60Hz house current or by using eight

(8)‘C’ batteries, not included. Attempting to operate this unit from any other power source may cause damage to the unit, which is not covered by your warranty.

AC Operation

Unwind the AC cord and extend it to its full length. Insert the small end of the AC cord into the AC socket on the rear of the unit. Insert the other end of the AC cord into any convenient 120V 60Hz household outlet.

Please note that this unit is equipped with a polarized AC plug which has one blade wider than the other. This is a safety feature to reduce the likelihood of electric shock. This polarized AC plug will only fit in a

polarized AC outlet. If you find that you cannot insert this plug into your outlet, you may have an obsolete non-polarized outlet. Please do not try to

defeat this safety feature by using a non-polarized adapter or by filing the

wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace your obsolete outlet.

NOTE: The radio memories will be kept for 10 seconds if the AC cord is unplugged and no batteries are inserted.

Battery Installation

To use this unit with battery power, remove the battery compartment on the bottom of the unit by sliding it in towards the rear of the unit. Insert eight (8) ‘C’ size batteries following the diagram in the compartment. NOTE: The AC power cord must be disconnected from the AC socket on the rear of the unit in order for the unit to operate on battery power.

+ +

FRONT