CONNECTION/PREPARATION___________________
Power supply
The player operates with the integrated
Charging the battery
Charge the battery using the computer or with the charger supplied. You can also charge the player by connecting it to a USB compatible
Note:
When charging the battery with the charger supplied, the player is still ready for operation.
1Connect the USB interface of the player via the USB cable with the appropri- ate interface on the computer, the charger or
2Switch on the computer or
–The display indicates the charging progress. The charging time is approxi- mately four hours. You can see in the »P« display when the battery is fully charged.
Notes:
The display of the player tells you about the state of the battery. If you see »Ä« in the display, the battery is running low.
The playing time of the device with batteries is up to twenty hours in audio mode and up to six hours in video mode.
Note:
There is a risk of explosion if the battery is not replaced properly. Only use the same type of battery or an equivalent.
Connecting to the computer
1Switch on the computer.
2Switch off the player.
3Connect the USB interface of the player to the respective interface on the computer via a USB cable.
– A display will appear as soon as the connection is made.
12