Introduction
About the SI 3 Speakers
The Extron System INTEGRATOR ™ SI 3 full range, compact, surface mount speaker is ideally suited for classrooms, conference rooms, and boardrooms. With a weather resistant construction, it is also suitable for outdoor environments, and has the following features (see below and page 2).
•3" full range internal driver
•75 Hz to 18 kHz,
•8 ohm nominal impedance
•16 watts continuous pink noise
•32 watts continuous program
•Internal driver overload protection circuit
Figure 2 — SI 3 speakers (with front grille removed)
NRefer to packaging information for location.
Carefully remove and check contents before installation.
NExtron recommends that the wiring installation be performed by a professional audio equipment installer.
CUse cable clamps to hold the cables in place for strain relief. Trim back/insulate exposed cable shields with heat shrink to reduce the chance of short circuits.
NFor "Troubleshooting Tips" see pages 10 and 11.
NFor "Service Access" see page 9.
SI 3 Speakers • Introduction | 1 |