Clock
Setting the Clock
1Press the POWER button to turn the under cabinet music system off.
2Press and hold the PROG/CLKSET button for 3 seconds, then release.
“CLOCK SET” will begin blinking on the display.
3Press the SKIP/SEARCH (�) button to adjust the minute. Press the other SKIP/SEARCH () button to adjust the hour.
4Press the PROG/CLKSET button to finish setting the time.
CD and Radio
Loading a CD
1Press the POWER button to turn the under cabinet music system on.
2Press the SOURCE button to switch to CD MODE.
CD MODE is indicated on the display by two blinking dashes “ -
3Press the OPEN/CLOSE button to open the CD drawer.
4Load a CD into the CD drawer, label side facing up.
Playing a CD
1Follow the instructions for LOADING A CD.
2After the power is on, the music system is in CD MODE, and the CD is loaded, press the PLAY/PAUSE button to begin playing a loaded CD.
Setting the Timer
1With the under cabinet music system turned off or on, press the TIMER button repeatedly to adjust the timer in increments of 10. (180max, 10min)
2Press the SKIP/SEARCH buttons to adjust the timer in increments of 1. (ie.
3After the set time has expired, the under cabinet music system will sound an alarm.
4To cancel the alarm after it has sounded, press the POWER button.
5To cancel the timer before the alarm has sounded, press the TIMER button repeatedly until it is set to “-
Programming a CD
1Follow the instructions for LOADING A CD.
2After the power is on, the music system is in CD MODE, and the CD is loaded, press the STOP button.
3Press the PROG/CLKSET button.
“01”, indicating the current program track, will begin flashing on the display.
4Press the SKIP/SEARCH buttons to select the CD track you would like to play in the program.
5Press the PROG/CLKSET button.
6Repeat steps 3, 4, and 5 to continue programming CD tracks.
Up to 20 tracks can be programmed.
7Press the PLAY/PAUSE button to begin playing the programmed CD.
8To cancel a program, press the STOP button twice.
Playing the Radio
1Press the POWER button to turn the under cabinet music system on.
2Press the SOURCE button to switch to RADIO MODE.
RADIO MODE is indicated by “AM” or “FM” on the display.
3Press the STOP button to switch between AM and FM radio.
4Turn the TUNING dial on the side of the under cabinet music system to tune the AM or FM radio.
6