GPX KC232S manual Connecting the Line Input, Playing Audio from the Line Input

Page 7

Line Input

Connecting the Line Input

1After the under cabinet music system is securely mounted, gently pull down the hidden DEVICE CRADLE from the bottom of the music system.

2Turn the DEVICE CRADLE so that it faces out. The DEVICE CRADLE will not turn 360 degrees

3Place an iPod or MP3 player into the DEVICE CRADLE.

iPod Touch devices are the most suitable fit.

4Connect the LINE INPUT CABLE to the stereo headphone jack on an iPod or MP3 player.

Pulling the LINE INPUT CABLE can result in damage to the cable and the unit.

Playing Audio from the Line Input

1Follow the instructions for CONNECTING THE LINE INPUT.

2Press the POWER button to turn the under cabinet music system on.

3Press the SOURCE button to switch to AUX MODE.

4AUX MODE is indicated by “AUX” on the display.

5Use the controls on the device connected to the LINE INPUT CABLE to begin playing audio.

6Use the VOLUME buttons on the under cabinet music system to control the volume output.

SOURCE

SOURCE

Customer Support: 1-888-999-4215

7

Image 7
Contents KC232S Important Safety Instructions Mounting Under a Cabinet FeaturesPower IncludedRepeat IntroductionLCD Display RandomSource TimerOPEN/CLOSE CD and Radio ClockLine Input Connecting the Line InputPlaying Audio from the Line Input Contact Information WarrantyCompany Information International Support