Emerson HD9971 owner manual AC Operation AC Adapter not included

Page 7

AC OPERATION (AC Adapter not included)

Connect the AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the back of the player as shown in the following illustration.

NOTE:

This optional AC adapter, should be rated as follows:

Input : 120V / 60Hz AC.

Output : 4.5V DC 500mA.

The adapter must have a female-type plug with a positive center:

Positive (+)

Negative (–)

Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to set the output selector to “DC 4.5V”.

If the AC adapter will not be used for an extended period of time, remove it from the wall outlet by pulling on the adapter housing. Do not remove the adapter by pulling on the cord. Do not touch the AC adapter with wet hands.

6

HD9971_ib_drafts.p65

6

19/4/2002, 15:52

Image 7
Contents HD9971 Thank you Class 1 Laser Product Important NotesPLAY/PAUSE Location of Controls and IndicatorsLCD Display Indicators Battery Operation Power SourceBattery Replacement AC Operation AC Adapter not included Normal Playback Operating InstructionsSKIP/SEARCH Controls Pause ControlRepeat Playback Point a To Point B Repeat To Cancel Repeat Play ModesProgram Play PGM Intro Play IntroTo Clear the Programmed Contents To Check the Programmed ContentRandom Play RND Electronic Skip Protection ESP Dbbs Switch Hold SwitchConnection to AN External Audio System Care and Maintenance Symptom Cause Solution Troubleshooting GuideEmerson Radio Corp Limited Warranty Emerson Radio Corp