Sharp MD-MT821 manual Disc name, When one or both tracks to be combined have a name

Page 29

W Combine

1 Start playing the last of the two tracks you want to combine, and press the ,I! button.

0 The unit will enter the pause mode.

2 Press the EDIT button to select “COM- BINE”.

To combine the fifth and sixth tracks

3 Press the ENTER/SYNC button.

0 To cancel the operation, press the U:OFF button.

1305+ 06 ? 1 (Confirming the combination)

4 Press the ENTER/SYNC button again.

0 The two tracks will be combined, and the unit will be paused at the begin- ning of the combined track.

0 The numbers assigned to the tracks following the combined track will be decreased by one automatically.

To combine two non-adjacent tracks: First, put the two tracks next to each other in the order you want using the MOVE func- tion (page 27). Then combine them using the COMBINE function.

When one or both tracks to be combined have a name:

The first track name will be used. However, when the first track does not have a name, the second track name will be used.

In the following cases, tracks cannot be combined.

Tracks recorded in the monaural long- play mode and tracks recorded in the stereo mode.

Tracks recorded from digital inputs and tracks recorded from analog inputs. Tracks whose recording time is less than 12 seconds.

H Disc name

0 Discs can be named using a maximum of 100 characters.

0 Up to 1,700 characters (approximately) can be used in the disc and track names on a single MiniDisc.

1While in the stop mode, press the EDIT button to select “DISC NAME”.

2 Press the ENTER/SYNC button.

0 The unit will enter the character input mode.

0 To cancel the operation, press the U:OFF button.

1

-.&ii- .la. . oc+m

3 Press the DISP button repeatedly to se- lect the type of characters.

0 The first 3 characters in the group of the selected characters will be dis- played for about 1 second.

ABC(Capital letters)

abc (Lower-case letters)

C123(Numbers and symbols)

4 Move the m REC LEVEL m shuttle switch repeatedly to select the first let- ter in the name.

0 When the button is pressed continu- ously, the displayed character will change rapidly.

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Page How to attach the handstrap Herein may result in hazardous For Your RecordsConcern for others when listen- ing to MiniDiscs Volume settingPrecautions LmportantBe reduced Remote control unitDo not drop or subject the battery to shock 16 17 18 Rechargeable battery power AC power Alkaline battery powerDigital recording Type of recordingAnalog recording Playback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording from CDs or MDs Synchro recordingTo interrupt recording To remove the MiniDisc After recordingRecording from a tuner or a CD Manual recording Track numbers can be created while recording.Manual recording There are cases where digital recording may be impossibleSynchro recording See Recording from the microphone Mic synchro recordingRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Press the Uoff buttonMore during synchro recording When making a mic manual recordingAbout the timed auto mark To start recording from the middle of an existing track Recording tracks as a single trackMaking a track number automatically Press the Mode button while the record- ing is paused Double timerecording in monaural modeTo check the remaining disc time To create your own track numbers while recordingTo erase tracks To erase tracks one at a time When recording from digital inputs CDs/MiniDiscs only Recording When is the TOC recorded?About TOC recording Page Precautions when making connec- tions To turn off the powerWhen the sound is distorted When using the unit with a car adaptorTo move to the beginning of the next track Apss Auto Proaram Search systemTo re-start the track being played Cue and reviewTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To display the playing time of an individual track To check the remaininoRecording time Total Remaining time Playing time Track Move What the editing function can doPosition Divide Single track can be divided into two at anyChecking DivideDisc name When one or both tracks to be combined have a nameTrack name If an incorrect letter is entered To erase a characterTo enter a space For the newly recorded MiniDisc Put the unit in the character input modeForm steps 1 2 on Complete j Listening through commercially available headphones How to read the battery indicator To eliminate the confirmation sound While in the stop modeTo turn the backlight on EL on 1 EL on1 EL on 2 EL on2Press the Uoff button Normal display will reappear Helpful tip when attaching a label Where not to store discsRegular cleaning Handling the MiniDisc Do not touch the disc directlyIs the remote control unit plug or the headphone plug HeadphonesIs the AC adaptor disconnected? MiniDis containing music?Maximum number of tracks Not beenReached If a MiniDisc has been recorded orSYS Charging time Battery life Cleaning When the unit becomes dirtyClean the headphone plug and the connecting cable plug 25 mV Kohms Recording level 1 Reference input level 1 Input impedance20kohms Wow and flutterMemo A9902.1 .15MNS.YT Call l-800-BE-SHARPSharp Plaza, Mahwah, New Jersey
Related manuals
Manual 4 pages 9.77 Kb

MD-MT821 specifications

The Sharp MD-MT821 is a compact and innovative MiniDisc player that captures the essence of portable music in the early 2000s. Designed for music enthusiasts who prioritize sound quality and functionality, the MD-MT821 stands out with its robust features and user-friendly design.

One of the main features of the MD-MT821 is its MiniDisc recording capability, allowing users to create their own audio compilations with ease. The device supports LP2 and LP4 recording modes, providing flexibility for extensive playlists and extended recording time. This means users could easily record their favorite albums, radio shows, or live performances directly onto MiniDiscs, making it a versatile option for music lovers.

The device showcases Sharp's advanced digital amplification technology, which enhances audio clarity and reduces distortion, resulting in a premium listening experience. The MD-MT821 is equipped with a high-quality digital-to-analog converter (DAC), ensuring that sound output is crisp and detailed. Its equalizer settings offer users the ability to customize their listening experience, catering to different music genres and personal preferences.

Portability is a key characteristic of the MD-MT821. Weighing in at just around 200 grams, it is lightweight and easy to carry, making it perfect for on-the-go music enjoyment. Its sleek and compact design fits comfortably in hand, and users can easily slip it into bags or pockets. The device also features a durable build, designed to withstand the rigors of daily use, which is essential for active individuals.

The MD-MT821 includes a backlit display that provides clear visibility of playback information, including track number, remaining battery life, and recording time. Its intuitive navigation buttons make it simple to browse through tracks and adjust settings quickly, even while moving.

Another notable characteristic is the device's battery life, which can last up to 20 hours on a single AA battery, giving users extended playtime without frequent recharging. This efficiency ensures that users can enjoy their favorite tracks during long commutes or travels without worrying about running out of power.

Overall, the Sharp MD-MT821 embodies a blend of innovative technology, user convenience, and exceptional audio quality, making it a significant player in the realm of portable music devices during its time. Its combination of recording capabilities, sound enhancement technologies, and portability makes it a cherished choice for many music aficionados.
Top Page Image Contents