Docking and Charging Your iPod R

OPERATING INSTRUCTIONS (CONTINUED)

This system is designed with the same 30-pin connector found in all iPod R docks. By simply connecting your iPod R to the docking station on the front panel of this system you can play your iPod R through the speakers of this system. And you can also recharge the battery in your iPod R .

Note: Recharging is only possible when you are using the system with the included AC adapter. Your iPod R battery will not be recharged when you are operating this system on battery power.

To accommodate all models of dockable iPod R we have included two different adapter / inserts to ensure that your iPod R will fit properly in the docking station.

Note: We have not provided adapters for the iPod R nano or the 5G iPod R models with video capability. The iPod R docking station in this system follows the Apple Universal Well design. If you are using an iPod R nano or a 5G iPod R with video capability please use the adapter that was supplied with your iPod R . That adapter will fit properly in the docking station of this system.

Refer to the chart below to select the proper adapter / insert for your particular model of dockable iPod R . Note: If you have a earlier non-dockable iPod R , or an iPod R Shuffle, please refer to the next section to connect you device to the Auxiliary Input jack.

iPodR inserts

Your unit comes with 2 removable inserts to ensure your iPod R fits properly in the dock on the front of the system.

iPodR

version

mini

photo

nano

iPod R size

30 40

GB GB GB GB GB

Small

Adapter

Large

Adapter

Use the adapter supplied	*	*	*	*	*
with your iPodR

1.Place the proper adapter / insert into the docking station. The iPod R 30-pin connector should fit through the opening in the bottom of the insert.

2.Gently press the insert into the dock until it is properly seated.

3.With your iPod R in the Power ‘Off’ mode carefully place it into the insert. Note: Remove any accessory case or “skin” from your iPod R before inserting it in the dock.

4.To remove or replace an insert, first remove your iPod R from the dock. then grip the insert and gently lift it upward and out of the dock.