Samsung HW-D7000 user manual Dual Mono, HDMI Audio, Audio Return Channel, Digital Output

Dual Mono

Dual mono programs have two independent mono channels.

You can use this function when dual mono programs are played.

When you use this function, select audio channels CH1, CH2 or both Channel.

•Ch 1 : Channel 1 is heard only.

•Ch 2 : Channel 2 is heard only.

•Both Channels : Both channels are heard from front speakers.

HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled On/Off.

•Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only.

•On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

✎NOTE

HDMI Audio is automatically down-mixed to 2ch for TV speakers.

Audio Return Channel

You can enjoy TV sound from the Home Theater speakers by using just one HDMI cable.

•Auto : Listen to TV sound from the Home Theater speakers if your TV is compatible with the Audio Return Channel function.

•Off : Turn the Audio Return Channel function off.

✎NOTE

When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.

Using an ARC (Audio Return Channel) uncertified HDMI cable may cause a problem in compatibility.

ARC function is only available if an ARC- compliant TV is connected.

Digital Output

You set the Digital Output to match the capabilities of the AV device you’ve connected to the product :

•PCM : Choose if you have connected an HDMI supported AV device.

•Bitstream (Unprocessed) : Select if you have connected an HDMI supported AV device with Dolby TrueHD and DTS-HD Master Audio decoding capabilities.

•Bitstream (Re-encoded DTS) : Choose if you have connected an AV device using a Digital Optical input that can decode DTS.

•Bitstream (Re-encoded Dolby D) : Select if you don’t have an HDMI supported AV device, but have an AV device with Dolby Digital decoding capabilities.

For more details, please refer to the digital output selection table. (See page 46)

✎NOTE

Digital Output can be activated when HDMI Audio is ON.

Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

If the HDMI device (AV device, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV.

It effects the optical and HDMI audio output when your product is connected to an AV device.

If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

03 Setup

English 45