Samsung HW-D7000 user manual Wireless Network

Setup

To view your Network Settings values on most Windows computers, follow these steps:

1.Right click the Network icon on the bottom right of the Windows desktop.

2.In the pop-up menu, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support tab, click the Details button. The Network settings are displayed.

To enter the Network settings into your product, follow these steps:

1.Press the ▲▼ buttons to select Wired, and then press the ENTER button.

2.Press the ◄► buttons to select IP Settings, and then press the ENTER button.

Settings

Display		IP Settings
Audio	IP Mode				Manual
Network	IP Address		0	.	0	.	0	.	0
System	Subnet Mask			.		.		.
			0		0		0		0
Language	Gateway		0	.	0	.	0		0
Security	DNS Mode				Manual
	DNS Server		0	.	0	.	0		0
General

11.Press the ENTER button to select OK. The Network Status screen appears. The product connects to the network after the network connection is verified.

Wireless Network

You can setup a wireless network three ways:

•Wireless (General)

•Using WPS(PBC).

•One Foot Connection

Wireless (General) includes both Automatic and Manual setup procedures.

Setting Up the Wireless Network Connection - Auto

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless

Support

OK

m Move Number " Enter ' Return

network, you will have to enter the Pass Phrase during the Auto setup process.

3.	Press the ENTER button to select IP Mode.
4.	Press the ▲▼ buttons to select Manual,
	and then press the ENTER button.

1.Press the ▲▼ buttons to select Wireless (General).

Settings

Network Settings

Display

Select a network connection type.

5. Press the ▼ button to go to the first entry

field (IP Address).

Audio

Network

System

Wired

6.	Use the number buttons on your remote to
	enter numbers.
7.	When done with each field, press the ►
	button to move successively to the next field.
	You can also use the other arrow buttons to
	move up, down, and back.
8.	Enter the IP Address, Subnet Mask, and
	Gateway values.
9.	Press the ▼ button to go to DNS Mode.
10.	Press the ▼ button to go to the first DNS
	entry field. Enter the numbers as above.

Wireless

Language (general)

Set up wireless network by selecting your Wireless

Security WPS(PBC) Router. You may need to enter security key depending on the setting of the Wireless Router.

General One Foot

Support Connection

> Move " Enter ' Return

2.Press the ENTER button.

When done, it displays a list of the available networks.

3.Press the ▲▼ buttons to select the desired network, and then press the ENTER button. The Security screen appears.

48 English