Basic Functions
Setting the speakers with DPL IIx
1.Set the 7.1CH Connection settings to "Surround Back". (For further details, refer to page 41.)
2.Press the PL II button of the remote control until the desired setting is displayed. Once selected with the desired mode, sound will be heard through the surround speakers.
MOVIE | Adds realism to the movie | |
soundtrack. | ||
| ||
| When listening to music, you can | |
MUSIC | experience sound effects as if you | |
are listening to the actual | ||
| ||
| performance. | |
GAME | You can hear like game sound. | |
MATRIX | You will hear multi channel | |
surround sound. | ||
| ||
| You can listen to a 2CH sound | |
| source in 5.1CH surround sound | |
PL | with all speakers active. | |
- A specific speaker(s) may not be | ||
| ||
| output depending on the input | |
| signal. | |
PL OFF | PL mode will be off. |
iPod SYNC
If you insert your iPod player into the |
|
iPod Dock that has already been | B |
connected to the system, you can play |
|
the video files in your iPod player |
|
through the connected TV. |
|
If the video signal does not synchronize properly with the audio signal, press iPod SYNC on the remote control to correct the synchronization.
✎NOTE
Before you can play the video files in the iPod player, you must connect the Audio/Video terminals of the TV to the home theater using the Composite (A/V) cable.
The models below support audio sync settings. Press iPod SYNC on the remote control to change audio delay.
Supported Models : classic/3G nano/4G nano/120GB classic/160GB Classic/5G nano
3D Sound
You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options.
3D SOUND OFF 3D SOUND HIGH
3D SOUND MEDIUM 3D SOUND LOW
✎NOTE
3D Sound is not available in FM mode.
Using the SHIFT button
ENTER, ▲▼◄►, S.DIRECT, TONE, SLEEP and AUDIO ASSIGN button will operate, after pressing the SHIFT button.
✎NOTE
ENTER, ▲▼, and ◄► buttons are active even when you don't press the SHIFT button.
TONE
After pressing the SHIFT button, and | TONE | |
9 | ||
then Press the TONE button repeatedly | ||
to select the option you want. |
| |
You can adjust the each value by |
| |
pressing the ▲▼ buttons. |
|
•BASS :
•TREBLE :
•TONE : ON, OFF
✎NOTE
The Tone Control function can be applied to all channels except for the subwoofer.
If it is set to Tone Off, the Tone Control function will be disabled.
64 English