Sharp MD-S301 operation manual Playing a Minidisc, Bass

PLAYING A MINIDISC

Headphones
	To the	jack
For the		BASS
left (L)
For the	Remote
right (R)	control unit

1 Insert the headphones plug firmly into the headphones jack on the remote control unit.

2 Plug the remote control unit into the

jack on the main unit. Push the plug all the way in.

●Since the remote control unit plug has only one correct orientation, plug it in as shown in the drawing.

3 Load a MiniDisc in the direction indi- cated by the arrow on the MiniDisc, with the label side facing up. (Insert the Mini- Disc firmly, until a click is heard.)

●The power will be turned on automat- ically, and playback will start from the first track. (Auto-play function)

When track names are included on the MiniDisc, the track names will be scrolled.

4 Press the VOLUME + button to in- crease the volume and the VOLUME – button to decrease the volume.

(0 - 30)

5 Adjust the bass level.

Each time the BASS button is pressed, the tone will be switched as follows:

	Bass is emphasized a little.
BASS 1
	Bass is emphasized more.
BASS 2
	Bass is emphasized still
BASS 3
	more.
BASS 0	Bass emphasis is canceled.

Track number

●After playback of the last track has fin- ished, the unit will stop automatically.

●The most recent volume or bass set- tings are saved when the power is turned off.

Note:

●Whenever any button is pressed, the remote control display will light for about 4 seconds.

8

MD-S301