Sharp MD-S301 Convenient Operation of the Unit, Checking the remaining amount of battery charge

Page 14

CONVENIENT OPERATION OF THE UNIT

■Checking the remaining amount of battery charge

The remaining amount of battery charge is

shown by the battery indicator ( ) on the remote control display during oper- ation.

Battery indicator

How to read the battery indicator

When the battery is

Charging is

completely charged

needed.

■To prevent the unit from being operated by mistake

To avoid operations being started by ac- cidentally pressing the buttons, use the hold function.

Move the HOLD switch to the safety posi- tion (direction indicated by the arrow).

●When the unit is in the safety mode, pressing the buttons will have no effect.

●When the battery is completely dis- charged, the whole battery indicator will flash. Recharge the battery or replace the alkaline battery with a new one.

●When the battery has completely run out, “Lo BATT” will appear in the dis- play. Then, the power will be discon- nected automatically.

Notes:

●When the AC adaptor included with this unit or an optionally available car adaptor is used, the battery indicator will not be shown.

●The number of bars shown in the battery indicator may increase or decrease, de- pending on the operation being per- formed. This is normal.

●When the rechargeable battery and the alkaline battery are used at the same time, the rechargeable battery is used first, and then the alkaline battery.

Since the battery indicator shows the re- maining amount of the particular battery being used, the number of bars will in- crease when the unit switches to the al- kaline battery.

●To cancel the safety mode, move the HOLD switch away from the safety po- sition (the opposite direction of the arrow).

 

Remote

Main

 

control unit

unit

Can be operated

 

 

from either the

Cancel

Cancel

remote control unit or

 

 

the main unit.

 

 

Can only be operated

 

 

from the remote con-

Cancel

Hold

trol unit.

 

 

Can only be operated

Hold

Cancel

from the main unit.

 

 

Cannot be operated

 

 

from either the

Hold

Hold

remote control unit or

 

 

the main unit.

 

 

If the hold function is active while the power is turned off, the power cannot be turned on by mistake and the battery will not be accidentally drained.

(The auto-play function will be activated.)

13

MD-S301

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MD-S301 ModelIntroduction ContentsAccessories For Your Records Special NotesConcern for others when Listening to MiniDiscs PrecautionsVolume setting PrecautionsDo not drop or subject the battery to shock Main unit Names of Controls and IndicatorsRemote control unit OFFPower Source Rechargeable battery powerAlkaline battery power AC powerPlaying a Minidisc BassWhen the sound is distorted To turn off the powerPrecautions when making connec- tions When using the unit with a car adaptorTo move to the beginning of the next track Convenient Playback FunctionsCue and review To search very quicklyRemote control Random play or repeat playTo check individual track names one by one To check the total playing timeTo check the elapsed time and remaining time of the track Convenient Operation of the Unit Checking the remaining amount of battery chargeHow to read the battery indicator To prevent the unit from being operated by mistakeTo turn off the display backlight While in the stop modeTo eliminate the confirmation sound To cancel the auto-play function To cancel the auto power save functionListening through a car stereo Using External UnitsListening through commercially available headphones What is a MINIDISC? TroubleshootingProblem Cause If trouble occursError Messages Cleaning MaintenanceSpecifications GeneralMiniDisc Player Memo Sharp Corporation Limited WarrantySharp Electronics Corporation
Top Page Image Contents