Electro-Voice Plasma Series manual Setup Diagrams for Plasma
Page 8
Figure 1a:
Figure 1b:
Rear Panel Plasma P1
Rear Panel Plasma P2
Setup Diagrams for Plasma
·Plug a line input into either the ¼-inch or the 3-pinXLR-type input connector. The ¼- inch input is in the center of the XLR connector and can accept unbalanced or balanced lines (TRS ¼-inch). The line input level required to drive the unit to full power is from – 12 dBu to 0 dBu. The system’s level control regulates the overall output level of the system.
