Silvercrest SRD 250 A1 Safety, Appliance consumes power when in standby-mode

Page 7

Safety

Safety

In this chapter you receive important safety information regarding handling of the appliance. This appliance complies with the statu- tory safety regulations. Incorrect usage can lead to injuries and property damage.

Danger from electric shock

DANGER

Life-threatening situation from electric shock!

A life-threatening situation can arise from contact with live wires or components!

Observe the following safety instructions to avoid electric shock hazards:

Do not use the appliance if the mains power plug or the connection cable are damaged.

Do not, under any circumstances, open the appliance housing. The risk of an electric shock is present if the power carrying connections are touched and the electrical and mechanical construction is changed.

The appliance consumes power when in standby-mode.

To completely separate the appliance from mains power, the power plug MUST be removed from the mains power socket. The appliance should be positioned so that you have unrestricted access to the mains power socket at all times, thus enabling the plug to be immediately withdrawn should an emergency situation arise.

GB

IE

SRD 250 A1

5

Image 7
Contents Clock Radio SRD 250 A1 R e w q 0 Operating components SafetyWarranty Service Importer Appendix Technical dataIntended use IntroductionInformation for these operating instructions CopyrightThese operating instructions the following warnings are used Appliance consumes power when in standby-mode SafetyInteraction with batteries Basic Safety InstructionsOnly permit children to use the appliance under supervision Operating components Package contents and transport inspection Setting up and connectingSet-up location requirements Inserting the batteries Electrical connectionFor VHF reception completely unfold the wire antenna Providing mains powerVHF wire antenna Setting the timeRadio operation Programming the wake time and method Automatic Switch-off Sleep function Switching the alarm function onSwitching the alarm off Switching the alarm function offRisk of fatal electrocution CleaningSetting the display illumination Clean the surfaces of the device with a soft, dry clothMalfunction causes and remedies TroubleshootingDisposing of the batteries StorageDisposal Disposal of the applianceAppendix Technical dataInformation regarding the EG Conformity Declaration WarrantyImporter ServiceMail kompernass@lidl.ie