3.Should the currently adjusted station trans-
mit RDS data, the 
indicator in the display o blinks. Then the display o shows the name of the radio station, and the time is updated (if activated in the settings, see section "Setting Update function"). During a running time update via RDS the clock icon in the display o flashes.
Automatic station search
You can have the kitchen radio search for stations. The kitchen radio searches the fre- quency range until it finds a station.
1.Press and hold the button UP 1( for two seconds: the kitchen radio searches for the station with the next highest frequency.
2.Press and hold the button DOWN l for two seconds: the kitchen radio searches for the station with the next low-
est frequency.
Repeat these steps until you have found a radio station to your liking.
Save and recall a radio station manually As the appliance can be used by numerous people, it is fitted with user switching, A/B. Both users can save different radio stations. To switch between users, press and hold the button USER/BASS d for two seconds.
Each user can save 32 radio stations in the appliance. Available for this are:
Preset button M1 r for the save positions A0 – A7,
Preset button M2 t for the save positions B0 – B7,
Preset button M3 y for the save positions C0 – C7, and
Preset button M4 u for the save positions D0 – D7.
Press the corresponding preset button once to address the save position "0", press twice for "1", etc.
1.Set the user and the desired radio station.
2.Press the button MEM SET/AMS h.In the display o the "MEM" indicator blinks.
If the memory location button r– u has been pressed previously, the memory loca- tion indicator and the MEM" indicator blink.
3.Press one of preset buttons
4.Press the button MEM SET/AMS h once again. "MEM" and the save position are constantly indicated, the radio station is saved.
5.Repeat the steps 1 to 4 (for both users) until all of the desired radio stations are saved.
6.To recall the saved radio stations, press the corresponding preset buttons (M1– M4
Automatically save and recall a radio station
With the AMS function (Automatic Memory System), the radio automatically searches for stations and stores them at the memory locations. Previously saved radio stations are thereby erased.
1.Press and hold the button MEM SET/
AMS h for two seconds. The kitchen ra- dio automatically searches for sufficiently powerful radio stations and saves them in the memory.
2.The station search can be stopped by press- ing on the button MEM SET/AMS h. The most recently found radio station plays.
3.When you press the button MEM SCAN f, the saved radio stations are recalled in their sequence and each is played for 15 seconds.
4.To quickly move on to another radio sta- tion, press the button MEM SCAN f.
5.To quit the automatic recall, press the but- ton MODE/
j. The display o will then show the time for 15 seconds.
- 9 -