2.Press the buttons UP/DOWN 1(/l to set the date at day intervals. Pressing and holding the buttons changes the date at intervals of 10 days.
3.Press the button MODE/
j once again to save the date and to switch to setting the memory function.
If you later press the DOWN button l in automatic mode, the display o briefly shows "DAY". Subsequently, the time and date dis- play alternate themselves. To switch back to an exclusive time display, press the button DOWN l once again.
Setting the memory functions
You can programme in up to 6 dates, which the appliance will remind you of when they are reached.
1.In automatic mode press the button MODE/
j three times. The display o shows alternatively a date and the
SDA 1 indicator for reminder date 1.
2.Press the buttons UP/DOWN 1(/l to set the first desired reminder date. As the earliest possible date you can set the following day. Pressing and holding one of the buttons changes the display in ten- minute intervals.
3.When you press the button TIMER g, the year number is deactivated and thus you are reminded on this date every year.
4.Should you wish to programme in further SDA's, press the button MEM SCAN f to select the desired memory positions
The selected memory location (SDA
5.Follow the same steps with the other dates.
6.To deactivate the memory function, pro- gramme in a date that lies in the past.
7.Press the button MODE/
j once again to save the settings of the memory function and to switch to setting the up- date function.
The appliance will remind you of a date that you have set with the reminder function. Then, on this given day from 08:00 – to 23:00, and on every full hour, the acoustic reminder alarm sounds for 10 minutes if you do not stop the alarm. In addition, the SDA- panel in the display o blinks. To stop the reminder alarm, press any button.
Setting the update function
Using this function, the appliance can auto- matically update the settings for the clock based on the RDS data.
1.In automatic mode press the button MODE/
j four times. The display o shows "UP DATE".
2.Press the button DOWN l, to deacti- vate the actualisation function. The blink- ing clock symbol 
in the display o then disappears.
3.Press the button UP 1( to reactivate the update function. The hour symbol 
ap- pears.
4.Press the button MODE/
j once again to save the settings of the update function (the display flashes for 15 sec- onds, after that the saving is finalised) and to switch to setting the 12 or 24 hour mode.
Setting the dimmer function
In automatic mode press the button MODE
/
j five times. Or press and hold the button DIMMER/AOT i to set the dimmer function outside of the Settings menu. In the display o appears either DIM ON (delivery state) or DIM OFF. Press and hold the button DIMMER/AOT i once again to change the dimmer setting.
DIM ON: The display o lights up for 15 sec- onds when a button is pressed.
DIM OFF: The display o is permanently lit.
- 6 -