![](/images/new-backgrounds/1142928/14292819x1.webp)
Specifications
1. | APPLICATION | Model |
2. | POWER SOURCE | AC 230V, 50Hz, 14W |
3. | DIMENSIONS | 348 (W)x 246 (D)x 106 (H) mm |
4. | WEIGHT | 3 Kgs |
5. CHARACTERISTICS (TEST DISC: |
| |||
| ITEM | TYPICAL | LIMIT | CONDITION |
(1) | Output level | 1KHz,0dB | ||
(2) | Channel balance | within 0.5dB | within1dB | 1KHz,0dB |
(3) | Frequency response | 0dB output | ||
(4) | ||||
(5) | Channel separation | 83dB | 75dB | 1KHz,0dB |
(6) | T.H.D. + NOISE*1 | 0.01% | 0.03% | 1KHz,0dB |
(7) | S/N ratio*2 | 86dB | 80dB | 1KHz,0dB |
NOTE: *1 With 20KHz low pass filter. |
| *2 With 20KHz low pass filter, | |||
6. SEARCHING TIME (TEST DISC: |
|
| |||
| ITEM | TYPICAL |
| LIMITS | CONDITION |
(1) | Short access time | 2sec |
| 4sec | Play next track |
(2) | Long access time | 4sec |
| 6sec | Track 1 |
|
|
|
|
| Track 20 |
7. PLAYABILITY |
|
|
|
| |
| ITEM | TYPICAL | LIMIT | CONDITION | |
(1) | Interruption | 1mm |
| 0.7mm | |
(2) | Black dot | 1mm |
| 0.6mm | |
(3) | Finger prints | 75um |
| 65um | |
(4) | Eccentricity | 140um |
| 140um | |
(5) | Vertical deviation | 1mm |
| 0.5mm | |
8. PICK |
|
|
|
| |
(1) | System |
| Object lens drive system optical | ||
(2) | Object lens drive system | 2 dimensional paralled drive | |||
(3) | Tracking detection |
| 3 spot beam detection |
| |
(4) | Optical source |
| Semiconductor laser |
| |
(5) | Wave length |
| 780nm |
|
|
9. GENERAL |
|
|
|
| |
(1) | System |
| Compact Disc Digital Audio | ||
(2) | Disc loading |
| Front loading |
| |
(3) | Display |
| LCD |
|
|
(4) | Pitch control range |
| Within | ||
(5) | Pitch bend |
|
|
| |
(6) | Pitch accuracy |
| 0.1 % |
|
|
10. | ENVIRONMENTAL |
| CONDITION |
| |
(1) | Operating Temperature |
| 5 to 35 deg. C |
| |
(2) | Humidity |
| 25 to 85% RH | ||
(3) | Storage Temperature |
|
|
11.ACCESSORIES
(1) | Connected RCA cable | 1 set for L and R channel |
(2) | Operating Instruction | 1 pc |
(3) | 1 pc |
12.NOTES
(1)The specifications are subject to change to any improvement by negotiations in advance.
(2)The parts are subject to change to any improvement within the range of the specifications.