1.DISPLAY PANEL
different modes and functions.
2.SEARCH WHEEL This wheel has 4 forward and 4
reverse speed positions allowing you to quickly scan through tracks. The more you turn the wheel in either direction the faster you search.
3.TRACK BUTTON These buttons are used the
select a track. Tapping the button will forward/back skip to the next track, holding down the button will rapidly forward/back skip through the tracks.
4.IN BUTTON This function allows you to set a cue point without music interrupt. This button also sets the starting point of a seamless loop.
OUT BUTTON This button is used to set the ending point of a loop. A loop is started by pressing the IN button, pressing the OUT button set the loop ending point. The loop will continue to play until the OUT button is pressed once again.
5.RELOOP BUTTON If a seamless loop has been
made, but the CD player is not actively in seamless loop mode (a loop is not playing), pressing the RELOOP button will instantly reactivate the seamless loop mode. To exit loop, press the OUT button. LOOP and RELOOP will appear in the LCD display when the reloop function is available. During play mode, pressing the RELOOP button will instantly return play the last set point without interrupt of music.
6.CUE BUTTON Pressing the CUE button during
playback immediately pauses playback and returns the track to the last set cue point. In pause mode and the CD is at the cue point, press the CUE button to provide cue monitor. The red CUE LED will lit when the CD is at the cue point.
7. PLAY/PAUSE BUTTON Each press of the button to change from play to pause or from pause to play. In skid mode, press this button to break or slow start.
8.SAMPLER BUTTON Press this button, then press
the desired BANK button to set the sampler mode. When sampler mode is set, the audio sample will play over (mixed with) the CD (if still playing). The audio sample can even play when there is no disc inside. The sampler will play once or continuous depending on mode. Press sampler button once for continuous play and LED is lit (static); Press button again for single play and LED flashes. Press again to cancel the sampler function and the LED is off.
9.MEMORY BUTTON Press this button to set the memory mode, then press the desired BANK button to memorize the music from the last cue point. The music length to be memorized is determined by the length of BANK. When the memory mode is set, the MEMORY LED is lit. You can also memorize the BANKs, FX’ parameter, and the last play mode (i.e. time, single/continuous, pitch select, activated FX) by pressing the memory for 1 sec. To recall the BANKs, just activate the memory mode before you load a new disc.
10.EJECT BUTTON Press this button to eject disc. The disc will not eject unless the player is in Cue or Pause, this is to prevent accidentally ejecting the disc
while in play mode.
11. KEY CORRECTION BUTTON This button is used to activate Key Correction via the pitch controls. Key Correction mode allows tempo change while maintaining the original key. When the Key Correction is selected, the LED above the KEY CORRECTION
button glows red.
12.PITCH ON/OFF BUTTON – This button is used to turn the PITCH SLIDER function on and off.
13.4%,8%,16%,100% PITCH SELECT BUTTON
Press the button in order to change pitch percentage of 4%,8%,16%,100%.
14.BANK BUTTONS Press the desired BANK button
when the MEMORY LED is lit will set the memory mode. The music from the cue point will be memorized to the flash. Press the desired BANK button when the SAMPLER LED is lit will set the sampler mode. The sampler length is determined by the smaller one of out point and bank length. Press the desired BANK button will return to the start point instantly. The LED of the BANK button last pressed will be flashing.
15.PITCH SLIDER This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and will remain set until the pitch slider is move or the pitch function has been turned off.
16.TIME BUTTON The TIME button will switch the
time value described in the time meter between elapsed play time, track remaining time, and total remaining time.
17.SGL/CTN BUTTON This function allows you to
choose between single track play or continuous track play (all tracks in order).
18. PITCH
19.JOG WHEEL This wheel has two functions:
1.The jog wheel will act as a frame search control when the CD in the pause or cue mode, allowing you to set a point.
2.The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch percentage up to 100%, and turning the wheel in the
20.CD LED This LED is illuminated when the CD tray is empty.