Lock Switch USE

Using the LOCK switch prevents unauthorized operation of the radio and will also prevent the station you are listening to from being changed. When the LOCK

switch is moved to its up position, the POWER button ant TUNING controls are completely disabled. If the radio is on when the LOCK switch is moved to its up position, you will not be able to turn it off. If the radio is off, with the LOCK

switch in its up position, you will not be able to turn it on. This will also prevent it from being turned on by accident, when packed in a suitcase or attache case. To release the LOCK switch, simply move the switch down.

EXTERNAL ANTENNA USE

To obtain optimum performance from this unit, especially when listening to SW an external antenna should be used to the EXTERNAL AN- TENNA ADAPTER and then plugged into the EXTERNAL ANTENNA jack located on the left side of the radio.

AM SENS				EXT
				ANT
				ANT

LOCAL

NARR

WIDE

MW STEP SELECTOR SWITCH

Located on the right side of the unit, just beneath the ROTARY TUNING knob is a switch marked, MW STEP: 9K/10K. This switch selects the incremental frequency STEPS for the MW band, depending upon your geographic location. In the USA, 10K STEPS are used, so the switch should be set to its lowest position. In other parts of the world where they use 9K STEPS, move the switch to the uppermost position.

9K 10K

MW STEP