Preliminary Settings

SETTING THE CLOCK

The time is displayed in the 24 hour mode since most shortwave stations operate according to Greenwich Mean Time. This is the standard that is used throughout the world.

The clock will start when 4 AA batteries are installed. The display shows "0:00"

1. Press "TIME SET". "0:00" disappears	TIME SET
& for 12 seconds "TIME SET" flashes.

2. While "FLASHING" set the correct time by pressing the numbered buttons. As you press the corresponding button the number shows up on the LCD display

3. If you press the wrong number, press the "C" [CANCEL] button which deletes one number at a time. Repeat step

#2 again.

NOTE

Time can only be adjusted when "TIME

SET" is in flashing mode.