Shenzhen High Power Tech C700 user manual Fm Set, Rec Set

4.6.4 FM SET

Enter FM SET window, you can select the RADIO MODE, FM BAND

MODE or SENSITIVITY.

Press VOL+ / VOL- button to set the output signal as STEREO or MONO in RADIO MODE.

STEREO: The output of frequency module is stereo signal;

MONO: The output of frequency module is mono signal.

Press “VOL+” / “VOL-“ button to set the FM band mode as WORLD or JAPAN in FM BAND MODE.

JAPAN: The reception band is 76~108MHZ;

WORLD: The reception band is 87.5~108MHZ.

Press “VOL+” / “VOL-“ button to set the SENSITIVITY as LOW,

MID or HIGH when automatic searching station.

4.6.5 REC SET

Enter REC SET, you can set SYCHRONOUS of LINE-IN recording, and bit rate of each recording status.

Press “VOL+” / “VOL-“ button to set whether or not to record synchronously in LINE-IN recording.

OFF: The input signal are recorded into one and the same file when recording continuously;

ON: iMuz would stops recording and make a new file to start another record when the input signal has whisht interval over 3 seconds.