SanDisk Sansa quick start What You Need to Begin, Installing the Battery

What You Need to Begin

To add music to the Sansa e100 MP3 Player, the following are needed:

Intel Pentium PC or equivalent.

Windows 2000 or Windows XP (Windows Media Player 9 or 10).

CD-ROM drive

USB 2.0 port required for High-Speed transfer.

Supports MP3, WMA, secure WMA and Audible audio file formats

Your Sansa Package contains:

Sansa e100 Series MP3 Player

Earphones

Armband

AAA battery

USB 2.0 travel cable

CD with valuable software and User Manual

Quick Start Guide

Installing the Battery

Follow the steps as shown in Figure 1:

1.Turn your player over, so the backside faces up, and locate the battery door at the bottom of the player.

2.Gently depress and pull the battery cover out towards the outside edge of your player.

3.Lift off the battery cover.

4.Push the battery down into the battery area of the player, placing the smooth bottom (--) of the battery against the spring in the battery area. The protruded top

(+) of the battery slips down and under. The battery should fit snugly.

5.Replace the battery cover until it snaps closed.

Quick Start ` 2