1
Setting Up Your SoundBridge Radio
To use SoundBridge Radio you will need to:
1.Put the included AAA batteries into your remote control. Make sure there is no object blocking the IR receiver located on the right side of your SoundBridge Radio display.
2.Attach the AM and FM radio antennas. At the rear of the unit, the FM antenna plugs into the FM connector labeled “FM” and the AM antenna plugs into the AM connector labeled “AM.”
3.Plug the power cord into the back of SoundBridge Radio, then into an electric AC power outlet. There is no power switch to turn on SoundBridge Radio. As soon as you plug in the power, you should see the Roku logo and the SoundBridge Radio welcome message.
4.Answer the questions on your display to configure SoundBridge Radio. SoundBridge Radio will then search for your
Note: The included AM antenna works well for strong, local stations. If you find that a particular station does not come in clearly or is “noisy”, you may wish to consider an alternative antenna. (We’ve found that the Terk
When a software update is available, your SoundBridge Radio will automatically offer you the choice to upgrade. Please take a minute to do so. You’ll just need SoundBridge Radio connected to a network with a
Section 1: Getting Started