Radio Shack 63-968 owner manual Fm Page 10 Friday, July 2, 1999 219 PM

63-968.fm Page 10 Friday, July 2, 1999 2:19 PM

To place the clock on a flat surface, turn the base on the bottom of the clock clockwise until it stops, then place the clock on the surface.

To mount the clock on a wall using hook-and-loop tape (not supplied), follow these steps.

1.Use a damp cloth to clean the back of the clock. Let the surface dry.

2.Remove the backing from one side of the tape and stick that side to the back of the clock.

Note: Do not place the hook-and-loop tape over the clock’s battery compartment cover.

3.Remove the backing from the other side of the tape and press the clock firmly onto the mounting surface.

10