SPECIAL FEATURES
MANUALLY SETTING THE TIME, DATE, AND LANGUAGE
When you turn off automatic time setting or if the clock does not receive a good radio signal, you can manually set the time and date.
Important: The clock automatically updates the time and date whenever you program it to automatically set the time and date (see “Turning Automatic Time Setting Off/On” on Page 16) and it receives a good radio signal. If you do not want this to hap- pen, turn off automatic time setting.
1.Repeatedly press ZONE/AUTO OFF to select the desired time zone. As you press ZONE/AUTO OFF, the time zone you select is highlighted on the display and a letter (P for Pacific, M for Mountain, C for Central, or E for Eastern) appears above the time zone.
2.Hold down MODE/SET until the hour digit flashes.
3.Repeatedly press or hold down +/AUTO ON to set the hour.
Note: AM appears for AM hours and PM appears for PM hours.
4.Press MODE/SET. The minute digits flash.
5.Repeatedly press or hold down +/AUTO ON to set the minute.
6.Press MODE/SET. The year digits flash.
15