OPERATION
SETTING THE TIME
1.Press MODE. The time and 
appear.
2.Hold down MEMORY/TIME then repeatedly press (or hold down) 9 HOUR until the display shows the cor- rect hour setting.
Note: PM appears when you set a PM hour. AM appears for an AM hour.
3.Hold down MEMORY/TIME then
repeatedly press (or hold down) MIN 8 until the display shows the correct minute setting.
CHANGING THE DISPLAY BRIGHTNESS
To change the brightness of the display, set DIM HI/LO to HI or LO.
TURNING THE ALARM ON/OFF
To have the buzzer sound or the radio turn on at the set alarm time, set
OFF/ALARM
buzzer alarm or to AUTO to have the radio play as the alarm.
To set the alarm, press ALARM ON/OFF.
appears. At the preset time | flash- |
es and the buzzer sounds or the radio turns on for up to 2 hours.
To cancel the alarm, press ALARM ON-
OFF. 
disappears and the alarm (buzz- er or radio) stops. To have the alarm sound the next day at the set time, press
ALARM ON/OFF again so 
appears.
To turn on the radio at any time, set RADIO to RADIO ON. Move the switch to either ALARM or
AUTO to turn off the radio and set the alarm again.
SETTING THE ALARM TIME
1.Repeatedly press MODE until SET ON and the current alarm time appear.
Note: If you do not set the alarm time within 10 seconds, the clock radio dis- plays the previous function. To con- tinue, start over at Step 1.
2.Hold down MEMORY/TIME then repeatedly press (or hold down) 9 HOUR until the display shows the desired alarm hour setting.
3.Hold down MEMORY/TIME then repeatedly press or hold down MIN 8 until the display shows the desired alarm minute setting.
Notes:
•To adjust the alarm volume, rotate
VOL.
•During a power failure, the alarm sounds instead of the radio regardless of how you set RADIO
USING SNOOZE
To temporarily silence the alarm or radio, for about 5 minutes, press SNOOZE. You can repeat this cycle as many times as you like. To turn off the alarm so it does not sound again, press ALARM ON/OFF.
5