
PLAYING THE RADIO
1.Turn VOL to a medium setting, then set RADIO
2.Press AM/FM to select the desired band.
Notes:
•The clock radio has a
•The FM antenna is built into the power cord. For the best FM recep- tion, fully extend the clock radio’s power cord.
3.Repeatedly press MIN 8 or 9HOUR to tune up or down to the desired sta- tion. To automatically seek and tune to
the next strong station, hold down
TUNING MIN 8 or 9 HOUR for about 2 seconds.
4.Rotate VOL to the desired volume.
5.To turn off the radio, slide RADIO ON- OFF/ALARM
Notes:
•If you play the radio and want be cer- tain that the radio sounds at the alarm time, be sure to set RADIO
•To display the time while the radio plays, repeatedly press MODE until
the time and appear. To return to the station frequency display, repeat- edly press MODE until the station fre- quency appears.
6
USING THE STATION MEMORIES
You can store up to 20 stations (10 AM and 10 FM) into memory and quickly recall each. Follow these steps to store a station.
1.Turn on the radio and select the desired band (see “Playing the Radio” ).
2.Press MEMORY/TIME. MEM appears.
3.Press a memory button
Notes:
•If you do not store a station within 3 seconds, MEM disappears. Begin again at Step 2 to store the station.
•To replace a stored station, simply store a new one in its place.
4.To tune to a stored station, press that station’s memory button. The memory location and the stored station’s fre- quency appear. To recall a stored sta- tion from 6 to 10, press +5 then the memory button
USING THE SLEEP TIMER
You can set the radio to play for up to 90 minutes then automatically turn off.
1.Tune to the desired station.
2.Set RADIO