Basic Operation
Basic Playback
Preparation before playing:
1.Connect your DVD player to the TV and amplifier.
2.Turn on the TV.
3.Set the TV to the AV input connected to the DVD player
4.Turn down the volume on your amplifier, and then power it on.
5.Set the amplifier to the AV input connected to the DVD player.
Step 1 - Press the POWER switch, the player will start. The logo is appers on TV screen.
Step 2 - Press OPEN/CLOSE button either on front panel or remote control. When the tray is open, place the disc on the tray with the label side up. Press OPEN/CLOSE again to Close the disc tray.
Step 3 - Press the PLAY button
on the front panel or remote control. The player will automatically read and identify the disc and begin playback.
12