Onkyo DS-A5 instruction manual Restoring the Default Settings, Troubleshooting, No Sound or Video

Page 27

Restoring the Default Settings

You can restore the DS-A5 to default settings. Perform this when the needs to restore the DS-A5’s name, volume value and network settings arise.

1Turn the power of DS-A5 on.

2Press the Repeat button on the remote controller for 10 seconds.

LED blinks in blue and green alternately, and the DS-A5 goes into default setting mode.

3Press the Mute button on the remote controller for two seconds.

The DS-A5 goes into standby status and LED turns off a light. The setting is restored to the default settings.

Note

Unless Mute button is pressed within 30 seconds after LED blinks in blue and green alternately, the default setting mode terminates.

Troubleshooting

No Sound or Video

Make sure your iPod/iPhone/iPad is connected properly.

If there’s no video, make sure your iPod/iPhone/iPad supports TV out.

Make sure your iPod/iPhone/iPad is playing.

Make sure your amp or AV receiver is turned on, the input to which the DS-A5 is connected is selected as the input source, and the volume control is not set to minimum.

Make sure all plugs are pushed in all the way.

Make sure the DS-A5 is connected to the correct input jacks on your amp or AV receiver. If there’s no video, check your video connections. Do not connect the DS-A5 to any jacks on your amp or AV receiver labeled OUT.

Make sure the AC adapter is properly connected to the DS-A5 and a suitable wall outlet.

Try resetting your iPod/iPhone/iPad.

27

Image 27 Onkyo DS-A5 instruction manual Restoring the Default Settings, Troubleshooting, No Sound or Video
Contents DS-A5 Avis Important Safety InstructionsPrecautions FCC Caution For U.S. modelsFor European models For Canadian modelsPage Page For some models Supplied AccessoriesAC adapter UcableTip Using the DS-A5About DS-A5 Compatible iPod/iPhone/iPad modelsPage Part Names Video OUT jack RI Mode switchEthernet port Audio OUT L/R jacksRemote Controller Page Aiming the Remote Controller Remove the battery-protect tab before useDS-A5 Hear a click sound Replacing the BatteryConnecting the DS-A5 Yellow Input Optical digital audio cableAmp or AV receiver Supplied ucable Amp, AV receiver or TV IPod/iPhone/iPad Inserting Your iPod/iPhone/iPad into the DS-A5Confirm that LED lights up in green Network SetupWireless connection Using Wi-Fi Network Login SharingConnected Wi-Fi router Wireless settings Wired connection Ethernet cableUsing Access Point Mode Confirm that LED lights up in green WEB settings Auto Standby Playing Contents via AirPlaySystem Off Auto Power OnSystem Functions System OnOther Remote Controller Operations Operating Notes Access the firmware update menu of the WEB settings Firmware UpdateRestoring the Default Settings TroubleshootingNo Sound or Video Cannot connect to Wi-Fi wireless LAN Remote Controller doesn’t workStatus LED Following table describes the DS-A5’s statusSpecifications Memo 4 0 1 2 2 1 B