Troubleshooting
■There’s no sound
•Make sure your iPod is actually playing.
•Make sure your iPod is inserted properly in the RI Dock.
•Make sure the RI Dock is connected to the correct input jacks on your AV receiver/amp. Do not con- nect it to any output jacks.
•Make sure your AV receiver/amp is turned on, the correct input source is selected, and the volume is turned up.
•Make sure the plugs are pushed in all the way.
•Make sure the AC adapter is connected to a suit- able wall outlet and connected to the RI Dock.
•Try resetting your iPod.
■Your AV receiver/amp’s remote controller doesn’t control your iPod
•3rd generation iPod models are not supported.
•Make sure your iPod is properly inserted in the RI Dock. If your iPod is in a case, it may not connect properly to the RI Dock. Always remove your iPod from the case before inserting it into the RI Dock.
•The iPod cannot be operated while it’s displaying the Apple logo.
•If your AV receiver/amp’s remote controller has remote mode buttons, make sure you’ve selected the right mode.
•Check the RI Dock’s RI MODE switch setting.
•When you use your AV receiver/amp’s remote con- troller, point it toward your AV receiver/amp.
•The RI Dock must be connected to your AV
receiver/amp with both an 
cable and an audio cable.
•The TAPE IN on some amps can be set to TAPE, MD, or CDR. Make sure the RI Dock’s RI MODE switch setting and the remote control mode match this setting. See your amp’s manual for more informa- tion.
If you still can’t control your iPod, start playback by pressing your iPod’s Play button. Remote opera- tion should then be possible.
•Make sure your AV receiver/amp’s remote control- ler is set to the correct remote control ID.
■Your AV receiver/amp unexpectedly selects your iPod as the input source
•Always pause iPod playback when listening to another component that’s connected to your AV receiver/amp. If playback is not paused, the Direct Change function may select your iPod as the input source by mistake when one track ends and another starts playing.
Caution: If you use this product under direct sunlight, fluorescent light, or germi- cidal lamp, ultraviolet or another elements in the light may change the product exterior color.
10