Cable, Func, Ually, Using Your iPod’s Alarm Clock

Using the RI Dock—Continued

		■ Charging Your iPod’s Battery
Operating Notes:		The RI Dock charges your iPod’s battery while
• The RI Dock must be connected to your		your iPod is in the RI Dock.
AV receiver/amp with both an	cable	Notes:

and an audio cable to use the	func-

tions.		• To charge your iPod battery, the AC
• If your AV receiver/amp doesn’t support		adapter must be plugged into a suitable
the System On, System Off, Auto Power		wall outlet and connected to the RI
On, and Direct Change functions, you’ll		Dock’s DC IN jack.
need to turn your AV receiver/amp on		• See your iPod’s instruction manual for
and off and select the input source man-		more information on battery charging.
ually.

•Before you select another input source, stop iPod playback to prevent your AV receiver/amp from selecting the iPod input source by mistake.

•If any accessories are connected to your iPod, your AV receiver/amp may not be able to select the input source properly.

•While your iPod is in the RI Dock, its vol- ume control has no effect. If you adjust your iPod’s volume control while it’s in the RI Dock, make sure it’s not set too high before you reconnect your headphones.

■Using Your iPod’s Alarm Clock

You can use your iPod’s Alarm Clock function to automatically turn on your iPod and AV receiver/amp at a speciﬁed time. Your AV receiver/amp’s input source will automatically be set to the input to which your iPod is con- nected.

Notes:

•To use this function, your iPod must be in the RI Dock, and the RI Dock must be con- nected to your AV receiver/amp with

both an cable and an audio cable.

•When you use this function, be sure to set your AV receiver/amp’s volume control to a suitable level.

•Your AV receiver/amp may take several seconds to startup, so you might not hear the ﬁrst few seconds of the ﬁrst song.

cable

func-

ually.

■Using Your iPod’s Alarm Clock