Olympus 150 operation manual Erase, Standby Mode

T572InstDS-150-E.Q33J1999/4/260:57PM y [ W 22

ERASE

2. ERASE ALL (ERASURE OF ALL MESSAGES IN A FOLDER)

1. ERASING A MESSAGE

2

ERASE SP DICT

MENU

INDEX/

3

ERASE SP DICT

MENU

INDEX/

1Select the folder containing the message you want to erase, display the desired message number, then press and hold the ERASE button 4 for more than one second. The displayed message number will blink.

2Press the ERASE button again within 4 seconds. [ERASE] blinks on the LCD panel . Erasure of the selected message starts.

3When the message has been erased, [OK] appears on the LCD panel.

XWhen a message is erased, the message numbers of all subsequent messages will be automatical- ly adjusted.

XIf any button except the ERASE button is pressed during message erasure or if the ERASE button is not pressed within 4 seconds message erasure will be canceled and the normal display will be restored.

1In the Stop mode, select the folder to be erased by pressing the INDEX/FOLDER button.

2 Press the MENU switch once (for less than 2 seconds), then press the Up/Down control until ERASE ALL is displayed (the word [ALL] will be blinking).

3 Within 4 seconds, press and hold the ERASE button for more than a second. Erasure of all the messages in the selected folder will start.

4 When all messages are erased, [OK] is displayed on the LCD panel for 2 seconds and is then replaced by [NEW].

XIf any button except the ERASE button is pressed during message erasure or if the ERASE button is not pressed within 4 seconds following the appearance of the ERASE ALL warning display, ERASE ALL will be canceled and the normal display will be restored.

STANDBY MODE

XWhen three minutes have passed in the Stop, Record-Pause or Playback-Pause mode, the recorder enters the Standby (energy saving) mode and the LCD goes out.

XTo cancel the Standby mode and return to the previous mode, press any of the REC, STOP, play, fast-forward and fast-reverse buttons or the MENU switch.