T572InstDS-150-E.Q33J1999/4/260:57PM y [ W 16
RECORD PAUSE
XIf the unit is left in the Record-Pause mode for three minutes, the Standby mode (Power-Save mode) is automatically engaged and the LCD panel goes out.
XWhen any of the REC, STOP, play, fast-forward and fast-reverse buttons or the MENU switch is pressed in the Standby mode, the Standby mode will be canceled and the Record Pause mode will be engaged. When the REC button is pressed subsequently, recording will resume within the same message number.
XVoice data recorded on this unit and stored in the built-in memory is referred to as a message. Each message consists of all voice data recorded from the start of recording to the point where the STOP button is pressed (see below). (Up to 99 messages can be stored per folder.) Pressing the REC button once during recording pauses recording and pressing it again resumes recording within the same message.
1To pause recording, press the REC button once.
2Recording is temporarily interrupted. The LCD panel and LED blink for as long as the unit is in the Record-Pause mode.
3To resume recording, press the REC button again.
4Pressing the STOP button during Record-Pause ends the current recording session and engages the Stop mode.
Pressing
REC
button
Pressing
STOP
button once
Pressing
REC
button
Pressing
REC
button once
Pressing
REC
button
Pressing
STOP
button once
Pressing
REC
button
Pressing
STOP
button once
Message No. 1 | | Message No. 2 | Message No. 2 | | Message No. 3 |
| | | | | |
| | | G | | |
Record Pause
