Specifications

Frequency Response1:	80- 20k Hz (-6 dB)
	75hz -20k Hz (-10dB)
Drivers:	low frequency- 3” (762 mm) magnetically shielded
	high frequency- 3/4” titanium dome, neodymium magnet structure
Maximum Output2:	99 dB SPL continuous rms output
(calculated)	106 dB SPL peak output
Impedance:	8 ohms nominal
	6.7 ohms minimum, 300 Hz
	31 ohms maximum, 150 Hz
Power Rating3:
rms (IEC 100 hrs):	30 watts rms
recommended amp power:	60 watts rms
Sensitivity:	85 dB, 1 watt, 1 meter, free field (4 pi)
Directivity Index:	500 Hz	2.5
	1000 Hz	4.5
	2000 Hz	7.0
	4000 Hz	7.0
	8000 Hz	2.3
	10000 Hz	11.4
Q:	500 Hz	1.77
	1000 Hz	2.8
	2000 Hz	5.0
	4000 Hz	5.0
	8000 Hz	5.35
	10000 Hz	13.8
Weight per pair:	AD-S32T:4.0 lb. net, 10 lb. shipping
Nominal Coverage:	100° horizontal. x 60° vertical
Enclosure and Grill:	high impact polystyrene, removable aluminum grill
Connectors:	Screw terminal connector for wire, bare wire or spade lugs.
Mounting Hardware:	Included: Ball mount adapter with wall plate and yoke mount with retaining knobs.
NOTES:

1- All frequency ranges specified refer to measured free-field response (4 pi).

2- Calculated maximum peak SPL at 1 m, free-field, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.

3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.

Specifications are subject to change without notice.