File Transfer, Double click the My Computer icon

NOTE: Make sure you turn off the player before connecting to the PC.

Once connected the player's built-in battery will automatically begin charging. "READY" will show on the LCD. When the battery is fully charged after approximately 2-3 hours on a continuous charge, the battery icon shows . Disconnect the player when charging is finished unless you are transferring files.

The battery status indicators are as follows:

Low

Medium

Full

NOTE: When the low battery indicator shows , recharge the battery as soon as possible. When the battery icon shows , this indicates the battery is about to run out of power within a few seconds.

NOTE: Charging time may very depending on the computer's USB usage status. If the player overheats or cools during charging, the battery icon appears on the LCD and the unit stops charging. The player will automatically restart charging after re-adjusting its internal temperature.

TIP: You can charge your player with the supplied USB adaptor (optional accessory). AC cable and plugs differ from region to region.

FILE TRANSFER

After connecting your MP3 player to the computer, the computer will detect and identify the device as a removable storage drive, allowing you to drag and drop all forms of files between your computer and your player.

1.Double click the My Computer icon.

2.Double click the drive letter (i.e. Removable Disk (H:) or Untitled on the Mac) of your player assigned by the computer.

3.Drag and drop the file(s) you wish to copy from your computer onto your player.

NOTE: You will not be able to view or play any of the stored data unless it is one of the supported MP3 (MPEG-1, Audio Layer 3) or WMA (Windows Media Audio) / WMA DRM audio formats.

MP200 Eng Manul R2(V1.1) OP

11/15/04, 10:33 AM

¶´ƒ