QSC Audio WL2102-w user manual Input Connections, Neutrik NL8FC Cable Connector Pinout

Page 5

Input Connections

The input connectors are a pair of Neutrik NL8's wired in parallel. Connections for bi amp and tri amp vary, see Table 1. The pin designations for the NL8FC cable connector is shown for ref- erence, bottom right.

Note! In TRI AMP mode, the MF (UNSHADED) SELECT switch position deter- mines the input connector wiring! Unexpected results may occur if switch positions and wiring are not strictly controlled.

The WideLine loudspeaker is not equipped with a crossover network. All signal processing must be done before connecting audio power to the loudspeaker. Do not connect full-range audio to the high-frequency transducer or damage may result!

Table 1: Input Connector Wiring, BI AMP and TRI AMP Modes

 

BI AMP

TRI AMP

TRI AMP

 

Internal Shading

MF (UNSHADED) SELECT

MF (UNSHADED) SELECT

Pin

Network Inserted in

Switch Position A

Switch Position B

 

Signal Path

Use External Processing

Use External Processing

 

 

for Shading,

for Shading,

 

 

 

 

 

 

 

 

1+

LF +

LF A +

LF B +

 

 

 

 

1-

LF -

LF A -

LF B -

 

 

 

 

2+

Not Used

LF B +

LF A +

 

 

 

 

2-

Not Used

LF B -

LF A -

 

 

 

 

3+

Not used

Not used

Not used

 

 

 

 

3-

Not used

Not used

Not used

 

 

 

 

4+

HF +

HF +

HF +

 

 

 

 

4-

HF-

HF-

HF -

 

 

 

 

Neutrik NL8FC Cable Connector Pinout

Shown, at right, is a diagram of the pin designation inside the Neutrik NL8FC connector. This infor- mation is for reference only. Diagram is of the connector as viewed from the wire-insertion end.

NL8FC pin designations- Plug viewed from the wiring side.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Cored Composite Enclosure Birch Plywood Enclosure TD-000227-00Disclaimer QSC Audio Products 3 Year Limited WarrantyFront grille removed IntroductionMF Unshaded Select Switch TRI AMP/BI AMP SwitchMF Unshaded Select Switch BI AMP Mode Pins 1+Pin Neutrik NL8FC Cable Connector PinoutInput Connections Rigging Component WeightRules for Suspension Shock LoadingFront Articulated Joint Knuckle Hardware Rear Link Angle Adjust HardwareFly Grid Fly Grid and Stacking FrameStandard L-track Stacking FrameStacking the Stacking Frame CareEnclosure System Specifications subject to change without noticeAccessories 20.75 527mm Dimensions- WL2102 and WL2102-wSures have approximately Draft on the enclosure 196mm Sides the birch plywoodPage Telephone Numbers How to Contact QSC Audio Products
Related manuals
Manual 56 pages 43.43 Kb Manual 12 pages 12.73 Kb

WL2102, WL2102-w specifications

The QSC Audio WL2102 is a sophisticated two-way line array loudspeaker designed for versatile sound reinforcement applications. With its innovative technologies and engineering, the WL2102 offers an impressive combination of power, clarity, and reliability, making it an ideal choice for both touring and permanent installations.

One of the standout features of the WL2102 is its advanced waveguide technology, which provides exceptional horizontal coverage and ensures consistent sound distribution across a wider listening area. This technology allows for precise phase coherence and minimizes inter-element interference, resulting in a clear and balanced audio experience for audiences of all sizes.

The WL2102 is equipped with dual 10-inch woofers that deliver powerful, deep bass response, paired with a high-frequency compression driver mounted on a newly designed waveguide. This configuration not only enhances the overall sound quality but also improves the speaker's efficiency. The result is a sonic performance that can easily cut through high ambient noise levels, making it perfect for outdoor events, concerts, and large venues.

Another notable aspect of the WL2102 is its lightweight and durable design. Constructed from high-quality materials, this speaker is built to withstand the rigors of touring while remaining easy to transport and set up. The cabinet features a unique rigging system that simplifies the alignment and deployment of multiple units in a flying array, ensuring optimal sight lines and coverage angles for audiences.

The WL2102 also incorporates QSC's proprietary "Amplified Networked" technology, allowing for seamless integration into modern audio systems. This feature enables users to monitor and manage multiple loudspeakers using QSC's software solutions, providing customizable control over performance parameters and system configurations.

With a frequency response range extending from 65 Hz to 20 kHz, the WL2102 is designed to deliver a full-spectrum audio experience, making it suitable for a wide variety of applications, including live music events, corporate functions, and theatrical performances.

In summary, the QSC Audio WL2102 stands out as a powerful, versatile loudspeaker that combines cutting-edge technology with user-friendly features. Its advanced design, exceptional sound quality, and robust build make it an excellent choice for sound professionals seeking reliability and performance in both touring and installation settings. Whether for large venues or outdoor events, the WL2102 is engineered to meet the demands of modern sound reinforcement.
Top Page Image Contents