QSC Audio WL2102 Front Articulated Joint Knuckle Hardware, Rear Link Angle Adjust Hardware

Page 7

Rigging

WideLine enclosures use a three-point suspension system. The system consists of front, left/right, captive articulated joints and a single rear link bar. Articulation is in 2° incre- ments using the first location on the link bar. With the use of the second location, 1° degree increments can be obtained starting at 3°. The total available angular increments are: 0, 2, 3, 4, 5, 6, 7, 8, 9, and 10°. All pieces and locking pins remain with the enclosures. No ancillary items are needed to suspend the enclosures from the WideLine array frame. All ball-lock pins are equipped with a lanyard to help prevent loss.

Front Articulated Joint- Slide the joint out of the receiver tube by sliding the retaining screw upward, then lock in place using the ball-lock pin.

Front Articulated Joint (Knuckle) Hardware

Expose the end of the articulated joint by locating the joint’s retaining screw protruding from the front of the receiver tube and sliding it upward. The front captive joint will slide upward from the enclosure’s receiver tube.

The exposed end of the articulated joint can now be inserted into the adjacent enclosure’s receiver tube and locked into position by a locking pin. This is repeated for each side of the enclosure. Then the rear link bar can be rotated into position and pinned at the chosen degree increment.

Rear Link (Angle Adjust) Hardware

The rear link is stored with the link folded between the sides of the block. To expose the link, remove the ball-lock pin and rotate the link into the desired position. Once positioned, the link is secured using the ball-lock pin of the adjacent enclo- sure.

The rear link is marked with a thin, white line at the “normal” (0°) position and with a “+3” at the +3° position.

The additional ball-lock pin hole (located approximately mid- way on the link) is used for storing the link when folded into the enclosure’s block for storage. The link may be pinned in place at the 0° or 8° location on the block when rotated into the storage position.

Rear Link-Remove the ball lock pin from the storage position, then rotate the link downward to the adjacent enclosure. Lock in place using the ball-lock pin.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Cored Composite Enclosure Birch Plywood Enclosure TD-000227-00Disclaimer QSC Audio Products 3 Year Limited WarrantyFront grille removed IntroductionPins 1+ TRI AMP/BI AMP SwitchMF Unshaded Select Switch MF Unshaded Select Switch BI AMP ModeInput Connections Neutrik NL8FC Cable Connector PinoutPin Shock Loading Component WeightRigging Rules for SuspensionFront Articulated Joint Knuckle Hardware Rear Link Angle Adjust HardwareFly Grid Fly Grid and Stacking FrameStandard L-track Stacking FrameStacking the Stacking Frame CareAccessories System Specifications subject to change without noticeEnclosure Sides the birch plywood Dimensions- WL2102 and WL2102-w20.75 527mm Sures have approximately Draft on the enclosure 196mmPage Telephone Numbers How to Contact QSC Audio Products
Related manuals
Manual 56 pages 43.43 Kb Manual 12 pages 12.73 Kb

WL2102, WL2102-w specifications

The QSC Audio WL2102 is a sophisticated two-way line array loudspeaker designed for versatile sound reinforcement applications. With its innovative technologies and engineering, the WL2102 offers an impressive combination of power, clarity, and reliability, making it an ideal choice for both touring and permanent installations.

One of the standout features of the WL2102 is its advanced waveguide technology, which provides exceptional horizontal coverage and ensures consistent sound distribution across a wider listening area. This technology allows for precise phase coherence and minimizes inter-element interference, resulting in a clear and balanced audio experience for audiences of all sizes.

The WL2102 is equipped with dual 10-inch woofers that deliver powerful, deep bass response, paired with a high-frequency compression driver mounted on a newly designed waveguide. This configuration not only enhances the overall sound quality but also improves the speaker's efficiency. The result is a sonic performance that can easily cut through high ambient noise levels, making it perfect for outdoor events, concerts, and large venues.

Another notable aspect of the WL2102 is its lightweight and durable design. Constructed from high-quality materials, this speaker is built to withstand the rigors of touring while remaining easy to transport and set up. The cabinet features a unique rigging system that simplifies the alignment and deployment of multiple units in a flying array, ensuring optimal sight lines and coverage angles for audiences.

The WL2102 also incorporates QSC's proprietary "Amplified Networked" technology, allowing for seamless integration into modern audio systems. This feature enables users to monitor and manage multiple loudspeakers using QSC's software solutions, providing customizable control over performance parameters and system configurations.

With a frequency response range extending from 65 Hz to 20 kHz, the WL2102 is designed to deliver a full-spectrum audio experience, making it suitable for a wide variety of applications, including live music events, corporate functions, and theatrical performances.

In summary, the QSC Audio WL2102 stands out as a powerful, versatile loudspeaker that combines cutting-edge technology with user-friendly features. Its advanced design, exceptional sound quality, and robust build make it an excellent choice for sound professionals seeking reliability and performance in both touring and installation settings. Whether for large venues or outdoor events, the WL2102 is engineered to meet the demands of modern sound reinforcement.
Top Page Image Contents