RF Remote Control Optional, Tune Down | M&S Systems dmc1/dmc1CD

dmc1

RF Remote Control (Optional)

Up to 4 different remotes can be programmed to control the Master Station. The system obtains a unique code from the remote, virtually insuring that no one else can interfere with your system and you will not interfere with anyone else.

To program the RF remote:

1.Simultaneously press and release AUTO and SOURCE. RF and SET appear on the display.

2.Press and hold any button on the remote until the RF and SET disappear from the display. The remote is now ready to use.

Note: To cancel programming of remote, press and release AUTO and SOURCE.

The remote is an RF (radio frequency) remote control, which means that you can use it from any location in the house. You do not have to be in the same room as the Master Station.

	Tune Up
	Tune Up
Tune Down	Scan radio stations when AM or FM are
Scan radio stations when AM or FM are	selected as audio source. Scan mode is set
selected as audio source. Scan mode is set	at Master Station.
at Master Station.

Volume Up

Press and hold to turn on System Music.

Press to adjust System Music volume.

Volume Down

Press and hold to turn off System Music.

Press to adjust System Music volume.

Source

Select audio

source: AUX, AM, FM, CD

Figure 13—RF Remote

Note: If 4 remotes have previously been programmed and a replacement remote (due to breakage or loss) is ordered, all 4 remotes will need to be reprogrammed.