Press the Dock Release button. Locate the correct holder to use as shown on page 10. Insert the holder onto the dock (as shown) and slip the side tabs into place.
IMPORTANT NOTE:
If you are using the holder marked “A compatible with any iPod with dock connector”, please insert the iPod universal dock (not included) corresponding to your iPod model onto the dock. Then, insert the holder followed by the iPod.
Once you connect the iPod, it will start charging the battery until it is full. (The iPod can charge only when the Mi8000 is connected with the AC adapter.) When the iPod is connected to the Mi8000, it will be in Charging mode until the battery is full. Please see the next page for instructions on using an iPod with this unit.
7
Insert the iPod onto the holder. Gently push down so the connector on the iPod slides onto the connector on the Mi8000. Press the edge area of the holder down gently (as shown) until it clicks into place.
NOTES:
• To remove, press the Dock Release button again. Then, remove the iPod first, followed by the holder.
• Do not press the holder by pushing the iPod.