MMP3682 MP3/WMA
MMP3682 MP3/WMA
Symptom
No fies are showing on the player after transfer
Player doesn’t display “Mass Storage Device”
No power after loading files
When I turn my player on, “Hold” and “ 
”
appears.
Possible Reason
Not supported file type.
Poor connection to PC.
Corrupted files or firmware
Hold switch is on.
Actions
Make sure the files are MP3 or WMA.
Check both connections- you may need to conect the player to a USB port on the back of your PC.
Perform the Firmware update procedure- see page 23.
See page 5 for location of hold switch.
WARNING!
Do not format this player unless it stops working and you are instructed to do so by technical support personnel.
●Formatting the Player
1.Click on Start and select Program. From program, select the Memorex Solid State Digital Audio Player, then click on Format.
2.A Format dialogue box will pop up, click on Start and the application program will format the Player.
Do not update the firmware unless you are experiencing problems with your digital audio device. Incorrect or faulty firmware installation will cause the player to stop functioning.
21
MMP3682 MP3/WMA
●Firmware Upgrade Procedure
For WinME, Win2000 or WinXP only
Your new player shipped with the most current version of the firmware available. No update is required at this time.
1.Install the "Memorex Solid State Digital Audio Player" program in your computer
1.1Insert the Installation CD
1.2An InstallShield Wizard will pop up automatically
1.3Click on Next to proceed the installation
1.4Once the installation is done, click on Finish
2.Firmware Download
2.1Download the latest firmware from our website www.memorexeletronics.com. Unzip the firmware file into the directory C:\Program Files\Memorex\Digital Audio Player
2.2Click on Start and select Program. From program, select the Memorex Solid State Digital Audio Player, then click on Update.
2.3An Update dialogue box will pop up. Click on Start and the application program will begin to download the firmware.
Remarks: Some memory space in Flash Memory is reserved for Firmware Upgrade Features. Therefore, usable memory space will be less than 128MB.
23
22
MMP3682 MP3/WMA
●Technical Specifications
Category |
| Item | Specification |
Audio |
| Frequency Range | 20Hz - 20KHz |
| Headphone Output | 20mW, 16ohm (Max.Vol) | |
|
| ||
|
| S/N Ratio | 85dB (MP3) |
File Support |
| File Type | MPEG 1/2/2.5 Layer 3, WMA, WAV (ADPCM), (WMA with DRM) |
| Bit Rate | 8Kbps - 320 Kbps | |
|
| ||
|
| Tag Info | ID3 Tag |
Dimension |
| O 63mmX62mmX20mm | |
Battery |
| 1 AA size Alkaline Battery | |
LCD |
| Full Graphics | |
Language |
| English | |
USB |
| USB2.0 | |
External Memory |
| SD or MMC | |
| 128MB | ||
Max. Playtime |
| Approx. 18 hours (128Kbps, MP3) | |
Supported OS |
| Win ME, Win 2000, Win XP | |
Firmware Upgradeable | Yes (except Win 98) | ||
Operating Temperature | |||
|
|
| 24 |