Memorex MMP8560 manual Removing & Replacing the Peel

Page 8

REMOVING & REPLACING THE PEEL

Remove the Peel and replace the Peel with one of the included Peels as follows:

12

To remove the Peel, hold the unit as shown at the figure.

Then pull out the Peel from the top edge.

34

To replace the Peel, pull out the USB cover slightly.

Make sure the tabs at the Peel are aligned to the corresponding slots on the main unit.

5

Make sure the USB cover is inserted through the USB hole in the peel (a), then press the middle area of the peel unit it locks in place.

6

b

a

a

Press on the left and right side of the peel until it is securely on the unit (a). Replace the USB cover (b).

NOTE: Before removing the Peel, make sure the headphones are removed from the Headphone jack.

7

Image 8

Contents MMP8560 Precautions SafetyRoad Safety CopyrightFCC Declaration Dear Customer Decibel Level Example Quiet library, soft whispersLocation of Controls 1112Battery Installation Removing & Replacing the Peel Using the Necklace Strap Install Digital Audio Player Software To Install the Digital Audio Player CD SoftwareWindows 98 Driver Installation Install the software under the directory as prompted Windows 98 Driver Installation Downloading and Transferring Files Transferring FilesSafely Remove Hardware Safely Removing Your Player from the ComputerInstalling Musicmatch Jukebox Installing Musicmatch Jukebox EQ-MUSIC Player only Turning the Power ON/OFF Lock SwitchOperation To Listen to the FM Radio Press the Volume + 1/- 2 buttons to adjust the volume AntennaTo Manually SET a Station Into Memory To Receive Memory Presets Preset indicator is not in the display. If itIs, press the Power/Stop button to clear it To Automatically SET Stations Into MemoryIf the unit is in a mode other than the Music To Listen to MP3s/WMAs/WAVsTo Pause Playback To SELECT/BROWSE Through the FilesFORWARD/REVERSE Skip HIGH-SPEED Music SearchTo Repeat a File To Repeat ALL FilesTo Randomly Play ALL Files To Randomly Play ALL the Files ContinuouslyPlaying a file P and the Repeat indicator Repeatedly until the play mode indicatorsPress the EQ/ button 1 five times while Press the EQ/ button 1 six times whileCreating a Playlist You can only program the same file into the playlist onceTo VIEW/CLEAR the Playlist Deleting a File PLAY/PAUSE p button 2 to confirm. IfFile will not be deleted Button Left or right to select no or YES, then pressTo SET the Contrast To SET the Play Timer It the Backlight setting will appearSettings menu To SET the BacklightTo SET the Power Savings To View the System InfoTroubleshooting Guide Symptom Cause SolutionSlide switch to the Unlock posi Not securely connectedOr firmware needs to be Formatting the Player Formatting the PlayerResetting the Unit Updating the FirmwareSpecifications Frequency Range Headphones Output RatioDimension Weight Battery LanguagePage Memcorp, Inc Weston, FL