CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1
1
3 
2
With a CD inserted, press the PLAY/PAUSE (®p)/POWER ON button 1 to turn the unit on and press the STOP (■)/POWER OFF button 2 to stop auto playback. Press the PROG button 3; the PROG indicator will appear in the CD display.
2 | 2 |
| |
| 1 |
| 3 |
Select the first track to be played back using the Skip/Search/Tuning o 1 or n 2 button, then press the PROG button 3 again. Repeat this step to program additional tracks up to a maximum of 24 tracks.
3 | 1 |
| 2 |
| 3 |
Press the PLAY/PAUSE (®p)/POWER ON button 1 to begin Programmed playback and adjust the VOLUME control 2 and DBBS switch 3 as desired.
4 |
|
2 | 4 |
1 | 3 |
To skip forward or backward through the programs, press the Skip/Search/ Tuning o 1 or n 2 button. When the disc is through playing, it will stop. Press the PROG button 3 followed by the PLAY/PAUSE (®p)/POWER ON button 4 to play back the programmed tracks again.
NOTES:
•Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
•As each program is played, the track number is shown in the display.
•To clear the memorized program: while in the Stop mode, press the PROG button followed by the STOP (■)/POWER OFF button.
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 24 tracks).
14