MPD8846.O/M.QXD 2/24/03 7:25 AM Page 9
CD OPERATION (CONTINUED)
CD PLAYBACK NOTES:
•See page 16 for more information on MP3’s.
•When recording (“burning”) CDs, make sure the session is “finalized”, or simply record (“burn”) only one session. You can find more information in your recorder’s manual.
•This unit is capable of playing standard CDs or 3” singles; no adapter is required.
•If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will appear in the display.
•If a disc is not recorded properly, a disc error will occur.
•Playback will stop when you open the CD compartment, but it is not recommended to open the compartment before the STOP (■) /POWER OFF button is pressed or during CD playback.
•If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
•It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback, depending on the number of tracks burned on the CD.
TO PAUSE A CD
1 |
2 |
During CD playback, if you wish to pause the disc momentarily, press the
PLAY/PAUSE ( 
) /POWER ON but- ton. Playback stops but the disc con- tinues to spin and the elapsed time flashes in the display.
Press the PLAY/PAUSE ( 
)/ POWER ON button again to release pause and resume playback. The sound returns and the elapsed time in the display stops flashing.
BACKLIGHT
When the power is turned on, the display backlight will light for eight seconds. With the power on, press any button to turn the backlight on for eight seconds. During Playback CD, TUNER or in Standby mode, press the ENTER/CLEAR button to turn on the backlight for checking the display.
9